![]() HU despite the coolant indicator light illuminating?Ĭooling water should be topped up immediately if the light flashes or lights up yellow after the engine has started. In case of emergancy:Idle pure and heating at full throttle! and im EmergencyMineral water or tap water also works as a coolant. The liquid starts at about 120 degrees Celsius zu. ![]() But if the engine gets hotter, turn off the vehicle and let it cool down. Will be the limit of 100 degrees not exceeded, then one careful onward journey usually still possible at low speed. If the problem occurs while driving, keep an eye on the temperature first. Otherwise there is a risk of engine damage due to overheating and damage to the cylinder head gasket, for example. If the indicator light comes on suddenly when the engine is running red or flashes, the engine must be switched off immediately and the vehicle must also be towed to the workshop. If there is a very large loss of cooling water, the cause should also be determined.Īs soon as the cooling water level drops, the temperature of the cooling water continues to rise. Is the fill level below the MIN mark, the car should be towed to the workshop. How exactly this works, where the container is located and what needs to be refilled are usually in the vehicle's manual. If the indicator light flashes or lights up yellow while the engine is running, the Cooling water level in the expansion tank to be checked. If there is a leak in the cooling system, the cause must be determined and remedied. If there is a crack or a defective seal anywhere, the pressure test ensures that the leak becomes apparent. Thus, the seal or the seals can be checked. So that the cause can be narrowed down further, the cooling system must be cut off in the workshop.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |